All you need to know about 2 Leg Chain Slings

Leg Chain Slings

What is a 2-Leg Chain Sling? How do they work? Where can you get one? The answers to all of these questions are, “They’re available at most sporting goods stores.” They come in a variety of sizes but typically are sized by the largest cross-section of chain that the truck and trailer will contain.

If you are looking for a rugged camping accessory that will allow two ropes to be attached to your hitch, then a double-leg chain sling is the best solution. These slings feature an adjustable single-length cross-section of chains along both legs. It is important to note that if you need to use more than one length of chains, the double leg chain sling will allow you to do so easily. Most double leg chain slings with single hook attachments are made with your choice of cross-sectional attachment: double oblong, cutaway, double loop, front hook, or back hook. However, most custom double leg chain slings are limited to a standard oblong configuration.

How do you attach them to your vehicle? 

To attach a double leg chain sling to your vehicle, you will need at least two other fittings: a strap handle and a hook or loop attachment. The strap handle allows you to raise the chainsaw from either the front or back of your truck. When raising the chainsaw, you should make sure that the chain is at least twelve inches from the frame. Once you have raised the chainsaw, you will then need to detach the fittings (if you are using a double strap chain sling) and secure them with ratchet straps or other fastening devices. After securing them, you can then lower the chainsaw into the pre-installed hole.

On a related note: Many people who purchase a 2 leg chain sling find themselves needing to remove the braces after mounting the chain on a bike. If you are faced with this situation, you need to remember that you must first drill a small hole on the underside of the bike’s seat tube. After drilling the hole, use a screwdriver to pry off the two self-locking hooks on the chainsaw. Once you have the hooks free, unhook the chain from the tubes and place them in the hole you just drilled.

Can you use self-retracting hook and chain holders?

Yes, you can use the self-retracting hook and chain holders. These types of holders are usually used on power equipment such as chainsaws. The holder takes the place of the chain and allows you to easily retract the chain by simply depressing a switch. For safety purposes, you should use the holder only when necessary. This also goes for double-leg chain slings.

You can also purchase the traditional chain sling hooks and chain holders. This is what older people use. They work fine but if you are looking for something more modern or stylish, you can go for the oblong master link style. This new design features a round, oblong shape with one sharp end. This makes it easier to grab onto the bike since it has no sharp edges on either end. The advantage of the oblong master link chain sling hooks and chain holders is that they are easier to clean since you don’t have to worry about rust or corrosion. If you would like to know about such services in the UK, you can visit the links such as https://www.ukliftingstore.co.uk 

Leave a Reply