If you want to install a ring security camera, then the following are the most manageable steps you should follow. You can buy an online security camera in Dubai.
- First, charge the battery of the ring security camera for at least 6 hours, and when your battery is fully charged, the camera is ready for installation.
- After charging, all you need is to gather the tools such as a screwdriver, screws and a box cutter for removing your old bell.
- Now you need to set up your ring bell with your home’s wifi network, and then all the apps will work on it. It will take only a few minutes to set up your ring bell with wifi.
- As you will deal with wires for your safety, switch off the house’s power from the breaker box. This step will prevent you from any electric shock.
- With the help of a screwdriver or box cutter, remove your old doorbell. After removing the old doorbell, the two wires will be exposed. You have to remove the wire for this use screws but do not deal too hard as it will damage wires. After this, the old doorbell will be removed.
- After that, position your ring security camera on the surface to fix it and check on your phone that you are getting the desired angle. And if you did not get the desired angle, you should use the mounting brackets to fix the camera’s angle. While using the mounting brackets, be careful if you tighten the screws too much; the brackets may bend.
- After this step, it’s time to position your camera doorbell above the bracket.
- Now turn on the power from the breaker and check that the camera is working well; there are two more security screws that you fix at the end when everything is in order.
- And your installation is complete now. You can set the features you want to use, such as motion detection and night vision. Adjust your camera at the location which you want to cover.
Conclusion:
After reading the above points, you will be able to install your ring security camera. If you want to buy a ring security camera, then you can buy them online in Dubai.
